Tuesday, January 31, 2017

Pet Sympathy Cards








I saw some pet sympathy cards on a blog called Shoe Girls Cards by Lisa Swarm and thought they were so elegant looking that I wanted to try doing the same.  I used the Pawing Around Dog (S4-515) and Pawing Around Cat (S4-516) by Spellbinders.  The Pet Sympathy (16201) stamps come in a set by Dare 2B Artzy.

I wanted to add the rainbow bridge poem to the cards in some way but ended up just using the rainbow colors for the background instead.  Boy, did I wipe away a lot of tears as I was on Pinterest reading all the different versions of the Rainbow Bridge.  You can find the rainbow background paper on Pinterest here.


Thursday, January 26, 2017

My Sweet Petunia



This is my sweet Petunia.  I think the E collar she is wearing looks like a Petunia.

Kyra is recovering well from her TPLO surgery last Tuesday.  She gets her staples taken out on Saturday and then will be able to go for short walks once again.  She can't wait.  She has been such a trooper staying at home with me while our other dog goes for her walk.  But I can tell Kyra is ready for a change of scenery.  Next week we will increase her pen size, probably almost doubling it.  She'll still have to be kept separated from her mother, our other dog so they don't play.

Our veterinarian is the one who asked if we had a soft E collar for Kyra when we went to see her yesterday.  Kyra does not like the typical plastic hard E collars; who can blame her.  She'd bump into everything with it on; it was so big.  This soft E collar is much smaller and still does the job.

If you need a soft E collar, just measure the neck size of your dog AND the snout to neck distance as well.  Compare the snout to neck size with the width of the soft E collar to be sure the collar is just slightly bigger than the snout to neck size of your dog.  This will make sure the collar will do it's job.

Hopefully just one more day of having to wear this E collar then Kyra will feel so much better.

Silver and Pink Love

Ann here with a card that can be used for Valentine's Day, a wedding, anniversary or a birthday.



For the background, I cut the Sue Wilson Canadian Collection Background die on silver mirror board.  All those tiny pieces within each flower popped out with just a rub of a finger.  This is what the background die looks like; it comes in two parts -- the larger outer frame and the smaller inside panel:

Sue Wilson Canadian Collection Background CED6201

I layered the background die cut on top of a sheet of pink designer paper.  Then I cut a white rectangle and adhered a piece of the same pink designer paper on top of that.

The "Love" die is the Frantic Stamper Handwritten Love You FRADIE09314.  This die is not currently available in the Dies R Us store but there are several others I could have used.

The tiny hearts are from the Cheery Lynn Designs Special Occasions.  I like the two framed hearts so I cut three of each, adhered them on top of each other for more dimension, then filled in the smallest heart with the center that cut out with it.

Cheery Lynn Special Occasions B242

This made for a very quick card that I think I will be sending to my parent's for their anniversary.

Remember to check back daily for inspiration from the other design team members.

Don't forget to play along at the Dies R Us Challenge Blog for your chance to win a gift voucher to the Dies R Us Store.  A new challenge begins on the first and fifteenth of every month.  Be sure to Follow Us on Facebook too. 





click below for:
STORE
CHALLENGE BLOG
FACEBOOK
INSPIRATION BLOG

Friday, January 20, 2017

A Card for the CHA

Ecstasy Crafts asked if I would design some cards for the upcoming CHA (Craft and Hobby Association) Mega Show in Arizona later in January.  This is one of a few cards that I had time to make before sending them off in the mail:


I used the following dies:






Wednesday, January 18, 2017

Tuesday, January 17, 2017

Flamingo Hugs


Ecstasy Crafts asked if I would make some cards for the CHA (Craft & Hobby Association) Mega Show coming up in a few days in Arizona.  The CHA is the largest craft industry trade event in North America.   The cards all have to be bright colored with spring and summer themes.

  I used the following dies, all available at Ecstasy Crafts:




Frantic Stamper Accessory Words #3 FRA9467

I'll be sharing more of the cards I made for the CHA every day this week.

Thanks for stopping by!


Monday, January 16, 2017

Hugs & Kisses




I was asked by Ecstasy Crafts to design some cards for the CHA (Craft & Hobby Association) Mega Show coming up next week in Arizona.  It's the largest craft industry trade show in North America.

I used the following dies and stamps to make my card:





Below is the Joy Crafts Garden Set which contains 13 dies:


As I make more cards for the CHA, I will post them here.



Sunday, January 15, 2017

Get Your Layers Perfect

A few weeks ago I stumbled upon a tool that makes layering your cards perfect every time.  It's called the Marsupial Layering Tool.  I had never seen this product before so I did some research, and then I knew I had to have it.  This is what it looks like:




It's really hard to get a good photo of it due to it's dark color.  The Marsupial Layering Tool or also called the JIG, is made out of a heavy plastic-type material and measures about 10" x 10",  has tiny feet on the bottom which keeps the tool from moving around on your work surface, and is also extremely light and easy to store.

The Marsupial Layering Tool ensures that all of your layers will be perfectly straight.  It has four sections to it for various border sizes:    1/8", 1/4",  3/8", 1/2", 3/4" and 1" borders.

Below is a label you can print, cut and adhere to your tool:



All you do to use the tool is lay down your smaller layer with the adhesive side facing up.  Place it in the border size of your choice, then take your next larger layer and line it up in the bigger border of your choice within the same box as your previous paper.  Press down to adhere the two together, flip the papers over, and you have perfectly lined up your layers on your card creating an even border all the way around.

  

Place your black card base on top of the white layer that has the adhesive face up and this is what you get (minus the blue wave)



Here is a video that shows how to use the tool.

Here are just a few examples of the various layers you can do on an A2 card.  You can also use the tool for 5x7 and other sized cards.



As I get older, my hands seem to shake quite a bit when trying to adhere layers on my cards.  I can't tell you the number of times I've adhered a layer only to realize it went on crooked.  Then I have to either tear off and try to salvage what I can or cover the unevenness with an embellishment of some kind.

This tool makes layering easy with shaky hands.  It's also great when you are mass producing cards and have all your layers cut and ready to assemble.

I'm not making any profit from advertising this tool on my blog.  What's great about it now, is that you can save $10 by using code LAYER10.

To purchase the Marsupial Layering Tool, go here.  There are also written instructions here.

I highly recommend watching the video to pick up some hints and tricks on using the tool.  It's very easy to use but the maker of the video explains a tip when using heavy card stock.

Leave me a comment if you have time so I know if you also feel this tool is handy.









Friday, January 13, 2017

Porcupine Valentine

Hi Everyone.  Today I have an early Valentine card to try and spark some inspiration if needed:


The background die is from the Sue Wilson Pacific Ocean Collection and the XOXO is from the Frantic Stamper Valentine Confetti set.

The card was made by cutting the background die on black card stock, then cutting the red glitter panel with the rectangle die that comes in the Sue Wilson Pacific Collection.  I then cut a white panel to layer under the red one to make it stand out a little more.

That cute porcupine is a die cut that comes in a monthly kit from the Green Duck Sales Die Cut Club.  You'll be seeing other cards that I'll be posting using more of the die cuts from the January kit.

This is what the dies themselves look like:





And this is what the entire January Green Duck Sales Die Cut Club kit contains:




Don't forget to play along at the Dies R Us Challenge Blog for your chance to win a gift voucher to the Dies R Us Store.  A new challenge begins on the first and fifteenth of every month.  Be sure to Follow Us on Facebook too. 





click below for:
STORE
CHALLENGE BLOG
FACEBOOK
INSPIRATION BLOG


Wednesday, January 11, 2017

Mr and Mrs Valentine


The two hearts on this card are from the January release of die cuts from The Green Duck Sales Die Cut Club.  I love how the hearts look so rounded by the shadows on them.  To finish off the card, I just added some leaves and the Mr and Mrs which are both Sue Wilson dies.

This is what the January release of die cuts looks like:


The possibilities are endless for the different cards you can make using these dies.  Check out the Die Cut Club Facebook Page to see what the other designers did with their die cuts for even more great ideas.


Sunday, January 8, 2017

Owl'll Always Love You


I love how the girl owl is waving her wings with excitement.  It's like she is fluttering around, so full of love.

The owls and the banner are from the January release of die cuts from The Green Duck Sales Die Cut Club.  They made for such a quick card, and the best part is, you get two of each owl so you can make another card with these adorable creatures.

This is what the entire January release looks like:


To see what the other ladies on the design team made with their die cuts, check out the Die Cut Club Facebook page.

Be sure to look at the blogs by the other design team ladies as two of them are giving away an entire January die cut club kit:  






Saturday, January 7, 2017

Swirly Thank You Cards

Ann here today with two Thank You cards using a die that is fit for any season or occasion.




I was given this beautiful, intricate Swirly Thanks die by Tutti Designs and couldn't wait to see what it looked like once it was cut out.  This is my very first Tutti Design die.  I have to admit that I normally shy away from dies that are too intricate based on past experience of having trouble getting the die to cut properly, even with a metal shim.  But this die cut perfectly the very first time, and I cut it with a heavy glittered card stock.  Now I seriously need to look into more of the Tutti Design dies.

For my first card above, I simply cut the die,  layered it on black and gold card stock and adhered some red gems to the centers of the flowers.  It made for a very quick card which would work great as an after-Christmas card, New Year's, wedding thank you or anniversary thank you card.

My second card, which is below, was made with the intention of showing you that the same die can be used on a more toned-down card for any time of year:


I cut the Swirly Thanks die twice, once in a darker shade of pastel green and again in a  lighter shade so I could layer and offset them a little.  Then I completely covered the entire die with a Wink of Stella pen.

The frame is the Sue Wilson Pacific Ocean Collection - Background die.  This has become one of my favorite dies for framing a card.  It, too, cuts out perfectly the first time for being such a detailed die.  The Swirly Thanks fits just right inside the frame too.

Now I can't wait to make more Thank You cards with this die.

Don't forget to play along at the Dies R Us Challenge Blog for your chance to win a gift voucher to the Dies R Us Store.  A new challenge begins on the first and fifteenth of every month.  Be sure to Follow Us on Facebook too. 





click below for:
STORE
CHALLENGE BLOG
FACEBOOK
INSPIRATION BLOG




Friday, January 6, 2017

A Tree of Life



Now that it's 2017, one of my New Year's resolutions is to spend more time with my family.

The tree in this card represents my family; my parents, sisters and brothers, nieces and nephews.  Normally, visiting family sounds easy, but in my case, my family is spread all over the U.S.   This year I want to turn a new leaf and visit my family in person, not just staying in touch online.



This is what the two dies look like:

 Sue Wilson Family Tree
Sue Wilson Pacific Ocean Collection Background die

I also used the Family Tree die for some scrapbook pages of my nephew, Ronan:



As you can see, you can use this tree for all seasons just by changing the color of the leaves.

Don't forget to play along at the Dies R Us Challenge Blog for your chance to win a gift voucher to the Dies R Us Store.  A new challenge begins on the first and fifteenth of every month.  Be sure to Follow Us on Facebook too. 





click below for:
STORE
CHALLENGE BLOG
FACEBOOK
INSPIRATION BLOG

Thursday, January 5, 2017

A Valentine for my Nephew


This truck die cut  from The Green Duck Sales Die Cut Club is perfect for a card for my two year old nephew.  All I had to do to make the card was to emboss the background with a heart embossing folder, cut out the white oval, and let the die cuts do the rest.  The truck is all one piece and comes with the glitter highlights on it.

This is the entire release for January:


You can see all the details on how to get the release or join the monthly club here.  To see what the other design team ladies made with their die cuts, check out the Die Cut Club Facebook page.



Wednesday, January 4, 2017

Love is in the Air



This card is so soft looking in real life with the pinks and whites.  The hot air balloon is from the January release of die cuts from the  Green Duck Sales Die Cut Club.  I offset it a little on the card to make it look as though it was being carried away by the wind.  The banner at the bottom of the card is also part of the January release.

This is what the entire January release consists of:


This month's release of die cuts was the easiest for me to make cards with.  I don't normally make Valentine cards, but these die cuts are just so cute, they make adorable cards on their own.  

Check out this link for all the details on how to get this release or future ones.

To see what the other design team ladies made with their die cuts, check out the Die Cut Club Facebook page.